MC33078DG4
| Parameters | |
|---|---|
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 16MHz |
| Max I/O Voltage | 2mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.15μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | MC33078 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Operating Supply Current | 2.05mA |
| Nominal Supply Current | 5mA |
| Slew Rate | 7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 300nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 16MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 16000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 150μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.75μA |
MC33078DG4 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. Op amp rates 2mV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . As long as the supply current of the chip does not exceed 2.05mA, this op amp ic can operate. 110dB should remain the voltage gain. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2.
MC33078DG4 Features
8 Pins
supply voltage of 15V
110dB voltage gain
MC33078DG4 Applications
There are a lot of Texas Instruments MC33078DG4 Instrumentational OP Amps applications.
- pH (acidity)
- Multimedia playback equipment
- Test equipment
- Displayers for aircraft and air transportation control systems
- Video amplifiers
- Communication device
- single/dual op amp sum and difference circuits
- High/low-pass filter circuit
- Weak signal detection
- Cinema or auditorium audio system
