MC33079PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 19 hours ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33079 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 8.4mA |
| Nominal Supply Current | 8.4mA |
| Output Current | 29mA |
| Slew Rate | 7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 300nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 16MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 9000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.8μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 150μV |
| Bias Current-Max (IIB) @25C | 0.75μA |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 16MHz |
| Height | 3.68mm |
| Length | 19.56mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC33079PG Overview
In the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. Buffer amps of this type are called General Purpose-types. There is a Tube case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 14. A total of 14 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 14 pins are located on the operational amplifiers. There is an input offset voltage of 2.5mV for this buffer op amp. This electronic part is best mounted with type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . A supply current of 8.4mA can be used to operate this linear amplifier. There should be no change in the voltage gain. There are a total of 4 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 18V.
MC33079PG Features
14 Pins
supply voltage of 15V
110dB voltage gain
MC33079PG Applications
There are a lot of ON Semiconductor MC33079PG Instrumentational OP Amps applications.
- Division circuits
- Professional videography
- Large motor controllers
- Television
- Non-polarized electrodes
- Test equipment
- Inverse/same-phase proportional circuit
- Scintillation detectors
- Integrator circuits
- Video computer boards
