MC33151VDR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 560mW |
| Technology | BIPOLAR |
| Voltage - Supply | 6.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC33151 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Nominal Supply Current | 10.5mA |
| Output Current | 1.5A |
| Input Type | Inverting |
| Rise Time | 31ns |
| Fall Time (Typ) | 32 ns |
| Rise / Fall Time (Typ) | 31ns 32ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.6V |
| Turn Off Time | 0.1 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC33151VDR2 Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is indicated.Configuration is supported by 2 drivers.Its recommended mounting way is Surface Mount.In the absence of a 6.5V~18V supply voltage, its superiority can be demonstrated.Gate type N-Channel MOSFET is designed for it.There is a temperature range for this device of -40°C~150°C TJ.The input type is Inverting.Its configuration starts with 8 terminations.Numerous related parts can be found under its base part number MC33151.Devices are mounted by Surface Mount.A total of 8 pins are available on the device.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.There are several useful electronic components found in its subcategory of MOSFET Drivers.A total of 8 pins are available for component connections.The output current supported by the device is 1.5A.Using 560mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.
MC33151VDR2 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 560mW
MC33151VDR2 Applications
There are a lot of ON Semiconductor MC33151VDR2 gate drivers applications.
- A/D drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- 3-Phase Motor Inverter Driver
- Line drivers
- Isolated switch mode power supplies (SMPS)
- Automotive Applications
- Motor Controls
- LCD/LCoS/DLP portable and embedded pico projectors
- High current laser/LED systems
- Motor controllers
