MC33151VDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 560mW |
| Technology | BIPOLAR |
| Voltage - Supply | 6.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33151 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 10.5mA |
| Power Dissipation | 560mW |
| Output Current | 1.5A |
| Propagation Delay | 100 ns |
| Input Type | Inverting |
| Turn On Delay Time | 100 ps |
| Halogen Free | Halogen Free |
| Rise Time | 31ns |
| Fall Time (Typ) | 32 ns |
| Rise / Fall Time (Typ) | 31ns 32ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.6V |
| Turn Off Time | 0.1 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33151VDR2G Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the packaging method.The configuration is supported by 2 drivers.In the direction of Surface Mount, gate drivers is mounted.In the absence of a 6.5V~18V supply voltage, its superiority can be demonstrated.N-Channel MOSFET is the gate type used for this design.For this device, the temperature range is -40°C~150°C TJ.The input type is Inverting.Its configuration starts with 8 terminations.Numerous related parts are available for its base part number MC33151.Mounting the device requires Surface Mount.When the device is designed, it has 8 pins.The device is specifically designed to function with a supply voltage of 12V V.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.There is an output current limit of 1.5A for this device.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.8 pins are present on the component.Mosfet gate drivers supports a current output of 1.5A.Considering its maximum power dissipation, 560mW shows its maximum capacity to transfer and conduct power loss without overheating.As a rule of thumb, the operating supply voltage should be set to 12V.
MC33151VDR2G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 560mW
MC33151VDR2G Applications
There are a lot of ON Semiconductor MC33151VDR2G gate drivers applications.
- Portable computers
- PCMCIA applications
- Motor Drives
- Isolated Supplies for Motor Control
- Active filtering
- Dual-Battery Systems
- Active Clamp Flyback or Forward and Synchronous Rectifier
- General Purpose 3-Phase Inverter
- High-voltage isolated DC-DC converters
- Automotive Applications
