MC33152PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Voltage - Supply | 6.1V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33152 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 10.8V |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 10.5mA |
| Power Dissipation | 1W |
| Output Current | 1.5A |
| Propagation Delay | 55 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ps |
| Halogen Free | Halogen Free |
| Rise Time | 36ns |
| Fall Time (Typ) | 32 ns |
| Turn-Off Delay Time | 90 ns |
| Rise / Fall Time (Typ) | 36ns 32ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.6V |
| Height | 5.33mm |
| Length | 10.02mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33152PG Overview
A higher degree of flexibility is achieved by adopting its 8-DIP (0.300, 7.62mm) package.Gate drivers is package in Tube case.In this case, gate drivers is mounted along the way of Through Hole.By using 6.1V~18V supply voltage, it is able to demonstrate its superiority.The gate type on this device is N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~150°C TJ.This program uses the input type of Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.You will find various related parts under the base part number MC33152.Mosfet driver is mounted using Through Hole.In the device, there are 8 pins.A supply voltage of 12V is required for operation.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 1.5A volts.There are several useful electronic components found in its subcategory of MOSFET Drivers.Components with 8 pins are available.The basis of the model has 2 outputs integrated.1.5A is the maximum output current supported by the device.The maximum power dissipation of 1W shows its maximum capability to transfer and conduct power loss without overheating.10.8V is the output voltage.As a rule of thumb, the operating supply voltage should be set to 12V.
MC33152PG Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 1W
MC33152PG Applications
There are a lot of ON Semiconductor MC33152PG gate drivers applications.
- Isolated Supplies for Motor Control
- Portable Navigation Devices
- Telecom switch mode power supplies
- High-voltage isolated DC-DC converters
- Multicolor LED/laser displays
- Motor Drives
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High current laser/LED systems
- Broadcast equipment
- Industrial Motor Inverter - Power Tools, Robotics
