MC33152VDG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 560mW |
| Technology | BIPOLAR |
| Voltage - Supply | 6.1V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | MC33152 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 10.5mA |
| Power Dissipation | 560mW |
| Propagation Delay | 55 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 36ns |
| Fall Time (Typ) | 32 ns |
| Rise / Fall Time (Typ) | 36ns 32ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.6V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33152VDG Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is packaged in the way of Tube.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 6.1V~18V.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Input type of Non-Inverting is used.It's configured with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MC33152.In this case, Surface Mount indicates how the device is mounted.Mosfet driver is configured wMosfet driverh 8 pins when designing.In order to operate, a voltage of 12V has to be applied.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 1.5A.There are several useful electronic components found in its subcategory of MOSFET Drivers.The board contains 8 pins for component connections.The basis has 2 integrated outputs.According to its maximum power dissipation, 560mW is capable of conducting and transferring a large amount of power without overheating.
MC33152VDG Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 560mW
MC33152VDG Applications
There are a lot of ON Semiconductor MC33152VDG gate drivers applications.
- Isolated Gate Driver Supplies
- High-voltage isolated DC-DC converters
- Isolated switch mode power supplies (SMPS)
- Solar inverters
- General Purpose 3-Phase Inverter
- High frequency line drivers
- Automotive Applications
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High-speed communications
- Digitally controlled power supplies
