Parameters |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Tin (Sn) |
Additional Feature |
MINIMUM SUPPLY NEEDED FOR NEGATIVE SENSING IS 4V |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
450mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Current Rating |
20mA |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC33161 |
Output |
Open Drain or Open Collector |
Pin Count |
8 |
Power Supplies |
5V |
Number of Channels |
2 |
Max Supply Voltage |
40V |
Min Supply Voltage |
2V |
Operating Supply Current |
560μA |
Power Dissipation |
450mW |
Max Supply Current |
900μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Voltage - Threshold |
Adjustable/Selectable |
Number of Voltages Monitored |
2 |
Halogen Free |
Halogen Free |
Min Reset Threshold Voltage |
1.245V |
Max Reset Threshold Voltage |
1.295V |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~105°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
MC33161DR2G Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are 2 channels available on this supervisor, and each channel has a different function. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 5V is applied to the power ic, it conducts. In a 2 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 8 pins in it. This power management system has 8 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2V. There should be no more than 40V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~105°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. For this power management, there is an 560μA volt supply current. Power management is also possible to add other features such as MINIMUM SUPPLY NEEDED FOR NEGATIVE SENSING IS 4V to name a few. A similar IC managements number of the manufacturer can always be found by using MC33161, the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly. The power management can work with a maximum supply temperature of 900μA. As far as the current rating is concerned, this IC power can handle up to 20mA currents.
MC33161DR2G Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
560μA operating supply current
Current rating of 20mA
MC33161DR2G Applications
There are a lot of ON Semiconductor MC33161DR2G Voltage Supervisors applications.
- Microprocessor system
- Telecommunications equipment
- Functional modules
- Medical-specific insulation monitor
- Sensitive sensors
- Leakage current detection
- Automotive permanent magnet synchronous motors
- Kitchen appliances
- DVR
- Radar