MC33171PG
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1800 kHz |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Micropower | YES |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1.8MHz |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 22 hours ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33171 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Channels | 1 |
| Operating Supply Current | 220μA |
| Nominal Supply Current | 220μA |
| Output Current | 5mA |
| Slew Rate | 2.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Output Current per Channel | 27mA |
MC33171PG Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tube case. The number of terminations is approaching the 8 mark. Linear amplifier has a total of 8 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 5mV voltage. This electronic part is best mounted with type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using a supply current of 220μA , this buffer op amp will be able to operate. 113.98dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 22V voltage. For packing the buffer amplifier, the RAIL-axis is adopted.
MC33171PG Features
8 Pins
supply voltage of 15V
113.98dB voltage gain
MC33171PG Applications
There are a lot of ON Semiconductor MC33171PG Instrumentational OP Amps applications.
- Industrial applications including automation
- Car stereo
- Video conversion and routing
- Signal transformation
- Oscilloscopes
- Vehicle electronics
- Polarized electrodes
- Differentiator circuits
- Medical instruments
- Displayers for aircraft and air transportation control systems
