MC33174DTBG
| Parameters | |
|---|---|
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33174 |
| Pin Count | 14 |
| Operating Supply Voltage | 22V |
| Number of Elements | 4 |
| Power Supplies | 5/+-15V |
| Operating Supply Current | 220μA |
| Nominal Supply Current | 880μA |
| Output Current | 5mA |
| Slew Rate | 2.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 27mA |
| Input Offset Voltage (Vos) | 5mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1800 kHz |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Nominal Gain Bandwidth Product | 1.8MHz |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
MC33174DTBG Overview
A 14-TSSOP (0.173, 4.40mm Width) case is used to package the op amp. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tube case. During the past two weeks, there have been close to 14 terminations. Linear amplifier has a total of 14 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 14 pins. Regarding input offset voltage, op amp rates 5mV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 220μA, this op amp ic can operate. There should be no change in the voltage gain at 113.98dB. A voltage rating of 4 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 22V voltage. The instrumentation amplifier is packed in the form of RAIL.
MC33174DTBG Features
14 Pins
supply voltage of 15V
113.98dB voltage gain
MC33174DTBG Applications
There are a lot of ON Semiconductor MC33174DTBG Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Radar
- Vehicle electronics
- Signal amplification
- Communication device
- PDA
- Multimedia playback equipment
- Test and measurement instruments
- Proportional counter tubes
- Power transmission
