MC33174VDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33174 |
| Pin Count | 14 |
| Operating Supply Voltage | 22V |
| Number of Elements | 4 |
| Power Supplies | 5/+-15V |
| Operating Supply Current | 220μA |
| Nominal Supply Current | 880μA |
| Output Current | 5mA |
| Slew Rate | 2.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 27mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1800 kHz |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Nominal Gain Bandwidth Product | 1.8MHz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33174VDR2G Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. This is a General Purpose type op amp. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 14 terminations over the past year. The pins on this board total to 14 in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 14 pins on this chip. Op amp ic rates 5mV for input offset voltage. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 220μA. There should be no change in the voltage gain at 113.98dB. There is a rating of 4 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 22V voltage. The linear amplifier is packaged by using a TAPE AND REEL axis.
MC33174VDR2G Features
14 Pins
supply voltage of 15V
113.98dB voltage gain
MC33174VDR2G Applications
There are a lot of ON Semiconductor MC33174VDR2G Instrumentational OP Amps applications.
- Integrator circuits
- Power control
- Active probe
- Portable docking station
- Portable media players
- High input resistance broadband
- Video amplifiers
- Weighing systems
- Medical imaging
- High-frequency data acquisition systems
