MC33179DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33179 |
| Pin Count | 14 |
| Power Supplies | +-2.5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 1.7mA |
| Nominal Supply Current | 1.7mA |
| Output Current | 80mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.6μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 1.5mV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 5MHz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33179DR2G Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. During the past two weeks, there have been close to 14 terminations. There are a total of 14 pins on this op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifiers device. A total of 14 pins are present on the instrumentation amplifier. The input offset voltage is 3mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . As long as the supply current of the chip does not exceed 1.7mA, this op amp ic can operate. 106.02dB should remain the voltage gain. Op amp ic has 4 channels. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.
MC33179DR2G Features
14 Pins
supply voltage of 15V
106.02dB voltage gain
MC33179DR2G Applications
There are a lot of ON Semiconductor MC33179DR2G Instrumentational OP Amps applications.
- Proportional counter tubes
- Automatic control
- Addition operation circuits
- Polarized electrodes
- Non-polarized electrodes
- Communication device
- Medical instruments
- Medical imaging
- Semiconductor detectors
- Multimedia playback equipment
