MC33201DR2G
| Parameters | |
|---|---|
| Bandwidth | 2.2MHz |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 109.54dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Power Supply Rejection Ratio (PSRR) | 66.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.2μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33201 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 900μA |
| Output Current | 80mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~12V ±0.9V~6V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 6mV |
MC33201DR2G Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 6mV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~105°C for optimal performance. The buffer amplifier is capable of operating from a supply current of 900μA . The voltage gain should stay at 109.54dB. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There are a total of 1 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 6V voltage. It is used TAPE AND REEL to pack the op amps.
MC33201DR2G Features
8 Pins
supply voltage of 5V
109.54dB voltage gain
Output Type: Rail-to-Rail
MC33201DR2G Applications
There are a lot of ON Semiconductor MC33201DR2G Instrumentational OP Amps applications.
- Signal operation
- Hand-held batteries
- Information processing
- Portable media players
- Active probe
- Logarithmic operation circuits
- Television broadcasting equipment
- Portable docking station
- Micro signal measurement
- Non-polarized electrodes
