MC33202DMR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33202 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 1.8mA |
| Output Current | 80mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~12V ±0.9V~6V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 8mV |
| Bandwidth | 2.2MHz |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 109.54dB |
| Power Supply Rejection Ratio (PSRR) | 66.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13V |
| Max Frequency | 100kHz |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33202DMR2G Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 8mV voltage. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~105°C . Using an 900μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. There are a total of 2 channels available on the op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 6V voltage. As a result of this, the buffer amplifier is packed in TAPE AND REEL.
MC33202DMR2G Features
8 Pins
supply voltage of 5V
109.54dB voltage gain
Output Type: Rail-to-Rail
MC33202DMR2G Applications
There are a lot of ON Semiconductor MC33202DMR2G Instrumentational OP Amps applications.
- RF cable systems
- ECG equipment
- Industrial applications including automation
- E-book readers
- Power control
- Test equipment
- Band-stop filter
- Active probe
- Power generator
- Communication device
