MC33202VPG
| Parameters | |
|---|---|
| Lifecycle Status | LIFETIME (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33202 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 1.8mA |
| Output Current | 80mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~12V ±0.9V~6V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 14mV |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 109.54dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 66.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13V |
| Voltage - Input Offset | 8mV |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Height Seated (Max) | 5.33mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC33202VPG Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. This is a General Purpose type op amp. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 14mV voltage. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -55°C~125°C . An 900μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 109.54dB. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 6V voltage.
MC33202VPG Features
8 Pins
supply voltage of 5V
109.54dB voltage gain
Output Type: Rail-to-Rail
MC33202VPG Applications
There are a lot of ON Semiconductor MC33202VPG Instrumentational OP Amps applications.
- Signal filtering
- Polarized electrodes
- Test and measurement instruments
- Multiplication circuits
- Digital cameras
- Switching amplifier
- Computer workstations
- Scintillation detectors
- Comparator
- Measurements of Wheatstone bridge
