MC33204DG
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33204 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 3.6mA |
| Output Current | 80mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~12V ±0.9V~6V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 2.2MHz |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 109.54dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Power Supply Rejection Ratio (PSRR) | 66.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13V |
| Max Frequency | 100kHz |
| Bias Current-Max (IIB) @25C | 0.2μA |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
MC33204DG Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In recent months, the number of terminations has approached 14. A total of 14 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~105°C as far as operating temperature is concerned. A supply current of 900μA can be used to operate this linear amplifier. 109.54dB should remain the voltage gain. There are a total of 4 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 6V.
MC33204DG Features
14 Pins
supply voltage of 5V
109.54dB voltage gain
Output Type: Rail-to-Rail
MC33204DG Applications
There are a lot of ON Semiconductor MC33204DG Instrumentational OP Amps applications.
- Instrumentation
- Semiconductor detectors
- Commercial audio systems
- Comparator
- Subtraction operation circuits
- Radiation thermometry transducers
- Video amplifiers
- High speed sample
- Vehicle electronics
- Signal amplification
