MC33204VDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33204 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 3.6mA |
| Output Current | 80mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~12V ±0.9V~6V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 17mV |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 109.54dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 66.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13V |
| Voltage - Input Offset | 10mV |
| Bias Current-Max (IIB) @25C | 0.2μA |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33204VDR2G Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 14. It consists of a total of 14 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 14 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 17mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . You can run this op amp ic on 900μA . There should be no change in the voltage gain. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. This linear amplifier has a total of 4 elements. The operating supply voltage of instrumentation amplifier is rated 6V voltage. As a result of this, the buffer amplifier is packed in TAPE AND REEL.
MC33204VDR2G Features
14 Pins
supply voltage of 5V
109.54dB voltage gain
Output Type: Rail-to-Rail
MC33204VDR2G Applications
There are a lot of ON Semiconductor MC33204VDR2G Instrumentational OP Amps applications.
- Medical instruments
- Power transmission
- Medical imaging
- Gaming industry
- E-book readers
- Oscilloscopes
- Video conversion and routing
- Strain gauges
- Automotive sensors
- Test equipment
