MC33262PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 9 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Voltage - Supply | 12V~28V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.54mm |
| Frequency | 50kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33262 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Operating Supply Current | 6.5mA |
| Power Dissipation | 800mW |
| Max Supply Current | 30mA |
| Input Voltage (Min) | 9V |
| Output Current-Max | 0.5A |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Mode | Critical Conduction (CRM) |
| Current - Startup | 250μA |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33262PG Overview
There is a 8-DIP (0.300, 7.62mm) package that comes with it.It is packaged in a Tube way.There is a Through Hole mounting type on the device.In order to operate it, it should be connected to the voltage supply of 12V~28V.The device is set to operate at -40°C~105°C.The part has other IC types such as POWER FACTOR CONTROLLER.A number of 8 terminals can be found on the device.Currently, the startup current is 250μA.Pin 8 remains the component's pin number.I think the best thing about this device is that there is a number of MC33262 in it.8 pins form a sum.Minimum input voltage is 9V, and it can function on this voltage.It's like a subclass of Switching Regulator or Controllers.As long as the frequency is kept constant at 50kHz, it is possible to continue to operate with good accuracy.Located on mount Through Hole, it forms part of the mountain range.A maximum of 0.5A output current is provided by itIt is always necessary to power the component with a 12V volt supply in order for it to operate.A supply temperature of 30mA is the maximum it can handle.There are several different ways in which 1 outputs can be expressed.The gadget's supply current is set to 6.5mA.18V can be used as an output.
MC33262PG Features
MC33262PG Applications
There are a lot of ON Semiconductor MC33262PG PFC PMICs applications.
- SMPS (Switching-Mode Power Supply)
- Car wiper
- HVAC (Heating, Ventilation, and Air Conditioning)
- Voltage tracker protection circuits
- SCP configurator
- Battery-powered device
- Automated test equipment
- Hot swap controller
- Communication device
- UPS (Uninterruptible Power Supply )
