MC33272APG
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33272A |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Channels | 2 |
| Operating Supply Current | 2.15mA |
| Nominal Supply Current | 4.3mA |
| Output Current | 37mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 300nA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 24MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Bias Current-Max (IIB) @25C | 0.65μA |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 24MHz |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC33272APG Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 2mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Operational amplifier can operate supply current at 2.15mA. The voltage gain should stay at 100dB. There are a total of 2 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 18V. For packing the buffer amplifier, the RAIL-axis is adopted.
MC33272APG Features
8 Pins
supply voltage of 15V
100dB voltage gain
MC33272APG Applications
There are a lot of ON Semiconductor MC33272APG Instrumentational OP Amps applications.
- Switching amplifier
- High input resistance broadband
- PDA
- Industrial control system
- Radar
- Home audio systems
- Signal amplification
- Fission chambers
- Oscilloscopes
- Navigation
