MC33274AD
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 days ago) |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 14 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 8.6mA |
| Current - Output | 37mA |
| Slew Rate | 10 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 650nA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 24MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 24000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.8μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.5V |
| Bias Current-Max (IIB) @25C | 0.65μA |
| Nominal Gain Bandwidth Product | 24MHz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
MC33274AD Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. The number of terminations approaches 14. A total of 14 pins are attached to buffer op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 14 pins on it. There is an input offset voltage of 2mV for this buffer op amp. It is recommended to keep the voltage gain at 100dB at all times. On the buffer amps, there are 4 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. You should only use op amp buffer at temperatures that are no higher than 85°C. The operating supply voltage of the buffer op amp is rated at 18V. RAIL is adopted to pack the instrumentation amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. The linear amplifier's supply voltage should be higher than 3V. You should conduct this electronic component under the dual supply voltage of 18V.
MC33274AD Features
14 Pins
supply voltage of 15V
100dB voltage gain
MC33274AD Applications
There are a lot of ON Semiconductor MC33274AD Instrumentational OP Amps applications.
- Integrator circuits
- pH (acidity)
- Blood pressure sensors
- Power control
- Instrumentation
- Computer workstations
- High/low-pass filter circuit
- High gain DC amplifier
- Commercial audio systems
- Test and measurement instruments
