MC33288DDH
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 8A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Temperature Grade | AUTOMOTIVE |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Power Dissipation-Max | 5W |
| Output Configuration | High Side |
| Max Supply Current | 8mA |
| Current - Output | 40A |
| Fault Protection | Over Temperature |
| Height Seated (Max) | 3.35mm |
| Length | 15.9mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
| Surface Mount | YES |
| Number of Pins | 22 |
| Weight | 2.230994g |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 20mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
MC33288DDH Overview
20 terminations are present in total.The terminal position of the device is DUAL.20 pins make up the entire device.With a supply voltage of 5V, high efficiency is possible.For operation, 22 pins are used.Stable operation can be achieved with a maximum operating temperature of 150°C°C.To maintain reliability, it functions at a minimum working temperature of -40°C degrees Celsius.The supply voltage (Vsup) should be kept above 4.5V for normal operation.5.5V (maximum supply voltage) is set.As the name suggests, this gadget uses an analog IC, which in this case is ANALOG CIRCUIT.As a default, it's set to output 2.Maximum output current drops to 8A to meet operation criteria.Hot Swap operates at a maximum current of 8mA.Hot Swap has 20mOhm resistance.
MC33288DDH Features
The terminal position of 20
MC33288DDH Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MC33288DDH hot swap controllers applications.
- Industrial application
- Supply voltage monitoring
- Temperature monitor output
- Limitting the inrush current
- Microcontrollers
- Circuit power protectors
- Load transient protection
- Automatic restart after load failure
- Hard drive
- Power supply hotswap & inrush control
