MC33291LDW
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 59/16V |
| Temperature Grade | AUTOMOTIVE |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Output Configuration | Low Side |
| Driver Number of Bits | 8 |
| Fault Protection | Over Temperature, Over Voltage |
| Turn On Time | 50 µs |
| Output Peak Current Limit-Nom | 2A |
| Supply Voltage1-Nom | 13V |
| Turn Off Time | 50 µs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; ZENER CLAMP |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 9V |
| Supply Voltage1-Max | 26.5V |
| Height Seated (Max) | 2.65mm |
| Length | 15.395mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
MC33291LDW Overview
You get it with the SOIC package.The package resembles a Bulk.There are a total of 24 terminations on it.In this case, the device is located at terminal DUAL.In total, it has 24 pins.An efficient supply voltage is possible with 5V.The gadget in Peripheral Drivers is self-contained.Hot-swappable device is stable to operate at a temperature of 150°C°C at the maximum.Maintaining reliability requires a minimum working temperature of -40°C degrees Celsius.Hot-swappable device is important that the supply voltage (Vsup) is kept above 4.5V for normal operation of the device.Hot-swappable device is set to 5.5V (maximum supply voltage).The power supply of the part is referred to as 59/16V.Hot Swap is set by default to output 8.Consequently, 500mA is the maximum output current that can be achieved to meet the operation criteria.
MC33291LDW Features
The terminal position of 24
MC33291LDW Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MC33291LDW hot swap controllers applications.
- Loads
- Overcurrent protection
- Datacom
- Switch
- Backplane
- Hard drive
- Active current limit
- Network switch
- High power circuit board
- Short circuit protection
