MC33363APG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 9.5V~40V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 20V |
| Topology | Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 1.5A |
| Frequency - Switching | 67.5kHz~285kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 14.9V |
| Height Seated (Max) | 4.44mm |
| Length | 19.05mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MC33363APG Overview
In the 16-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.As you can see, this AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -25°C~150°C TJ °C in order for it to perform properly.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.At this point, the switching frequency reaches 67.5kHz~285kHz .This AC/DC converter is designed for use within the range of 9.5V~40V supply voltage (Vcc/Vdd).A total of 16 terminations have been recorded.There are a total of 16 pins on the ac-dc converter.Based on a unique technique, it is possible to ensure input voltages with the maximal value of 40V .An amount of current of 1.5A can be supplied to the ac to dc inverter.
MC33363APG Features
Packaged with 16-DIP (0.300, 7.62mm)
Switching Frequency at 67.5kHz~285kHz
MC33363APG Applications
There are a lot of Rochester Electronics, LLC MC33363APG AC DC Converters applications.
- LED lights
- SMPS house keeping power supplies
- Standby power supplies for TV
- Small off-line low voltage power supplies
- Networking
- MPS parts
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Adapters for Handheld Electronics
- Home Appliance Applications
- Wall switches
