Parameters |
Package / Case |
QFN |
Surface Mount |
YES |
Number of Pins |
24 |
Weight |
937.603778mg |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Resistance |
15mOhm |
Max Operating Temperature |
150°C |
Min Operating Temperature |
-40°C |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.9mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
24 |
Number of Outputs |
4 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
27V |
Supply Voltage-Max (Vsup) |
5.5V |
Temperature Grade |
AUTOMOTIVE |
Interface |
SPI |
Output Configuration |
High Side |
Max Supply Current |
20mA |
Min Input Voltage |
6V |
Max Input Voltage |
27V |
Fault Protection |
Over Temperature, Over Voltage |
Turn On Time |
130 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SOURCE |
Height Seated (Max) |
2.2mm |
Length |
12mm |
Width |
12mm |
RoHS Status |
RoHS Compliant |
MC33580BAPNAR2 Overview
This is included in the QFN package.In total, it has 24 terminations.QUAD is the terminal position of the device.24 pins make up the entire device.With a supply voltage of 5V, high efficiency is possible.In order to operate, 24 pins are used.Stable operation can be achieved with a maximum operating temperature of 150°C°C.Hot-swappable device operates at a minimum temperature of -40°C degrees Celsius in order to ensure reliabilHot-swappable devicey.Hot-swappable device is set to 5.5V for the maximum supply voltage.Hot Swap is set by default to output 4.In order for it to operate, a current of 20mA is required.Devices have 15mOhm resistance.
MC33580BAPNAR2 Features
The terminal position of 24
MC33580BAPNAR2 Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MC33580BAPNAR2 hot swap controllers applications.
- Network router
- ISDN system
- DC boost circuit
- USB interface
- Thermal limitation
- Overvoltage protection
- Power monitoring
- Identify faulty boards
- Circuit power protectors
- Board or blade insertion into live backplanes