MC33880DWR2
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 28 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 800mA |
| Supply Voltage-Max (Vsup) | 5.25V |
| Temperature Grade | AUTOMOTIVE |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | SPI |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Power Dissipation-Max | 1.3W |
| Current - Output | 800mA |
| Halogen Free | Not Halogen Free |
| Fault Protection | Over Voltage |
| Height Seated (Max) | 2.65mm |
| Length | 17.925mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
MC33880DWR2 Overview
You can find it in the SOIC package.Hot-swappable device terminates wHot-swappable deviceh 28 in total.Its terminal position is DUAL.The device has a total of 28 pins.With a supply voltage of 5V, high efficiency is possible.A 28 pin is used for operation.Hot-swappable device is stable to operate at a temperature of 150°C°C at the maximum.Maintaining reliability requires a minimum working temperature of -40°C degrees Celsius.For normal operation, Vsup should be maintained above 4.75V.5.25V is set for Vsup (maximum supply voltage).As you can see in this example, the gadget uses an analog IC called BRUSH DC MOTOR CONTROLLER.Hot Swap is defaulted to output 8.To meet the operation criteria, the maximum output current drops to 800mA.
MC33880DWR2 Features
The terminal position of 28
MC33880DWR2 Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MC33880DWR2 hot swap controllers applications.
- Short-circuit protection in real time
- Loads
- Board or blade insertion into live backplanes
- CompactPCI
- Short circuit protection
- Base station
- Base station power distribution system
- Network router
- Central office switching systems
- Load transient protection
