MC33882PEP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-VQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33882 |
| JESD-30 Code | S-XQCC-N32 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 59/17V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI, Parallel |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~25V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 400m Ω |
| Supply Voltage1-Nom | 13V |
| Turn Off Time | 10 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 8V |
| Supply Voltage1-Max | 25V |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
MC33882PEP Overview
Tray is how it's packaged.There is a package for it in the 32-VQFN Exposed Pad package.Surface Mount is the mounting type of the LED driver.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 6 outputs that are available for use.In order to operate, it requires a voltage supply of 4.5V~5.5V.There is a maximum output voltage of N-Channel volts.It belongs to the family MC33882.It contains 32 terminations.There are 1 functions of the LED driver.As long as the supply voltage is 5V, high efficiency can be achieved.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).Normal operation requires a voltage above 4.5V for the supply voltage.This part's power supply is 59/17V.
MC33882PEP Features
Supplied from 5V
MC33882PEP Applications
There are a lot of NXP USA Inc. MC33882PEP Power Switches ICs applications.
- Low Voltage I/O System Power
- Solid-State Drives
- PC Card Hot Swap
- Storage Drives
- Smartphone and PDA
- PDAs
- Portable Devices
- USB Protection
- Solid State Drivers
- Portable GPS
