MC33882PEPR2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-VQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33882 |
| JESD-30 Code | S-XQCC-N32 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 59/17V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI, Parallel |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~25V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 400m Ω |
| Supply Voltage1-Nom | 13V |
| Turn Off Time | 10 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 8V |
| Supply Voltage1-Max | 25V |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
MC33882PEPR2 Overview
It is packaged in the manner of a Tape & Reel (TR).In the 32-VQFN Exposed Pad package, it is included.In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.As a default, the output is set to 6.A supply voltage of 4.5V~5.5V is required for it to operate.A maximum output voltage of N-Channel volts has been specified.It is a member of the MC33882 family.The termination count is 32.The LED driver has 1 functions.The supply voltage of 5V is conducive to high efficiency.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The maximum supply voltage for this LED driver is 5.5V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 4.5V.There is a voltage supply of 59/17V volts on this part.
MC33882PEPR2 Features
Supplied from 5V
MC33882PEPR2 Applications
There are a lot of NXP USA Inc. MC33882PEPR2 Power Switches ICs applications.
- HDD, SSD
- PC Card Hot Swap
- Hot Swaps
- USB Ports/Hubs
- Hot-Swap Systems
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Solid-State Drives
- PDAs
- Portable GPS Device
