MC33882PVWR2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 30-BSOP (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC33882 |
| JESD-30 Code | R-PDSO-G30 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 59/17V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI, Parallel |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~25V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 400m Ω |
| Supply Voltage1-Nom | 13V |
| Turn Off Time | 10 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 8V |
| Supply Voltage1-Max | 25V |
| Height Seated (Max) | 3.4mm |
| Length | 15.9mm |
| Width | 11mm |
| RoHS Status | ROHS3 Compliant |
MC33882PVWR2 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included in the package 30-BSOP (0.433, 11.00mm Width) Exposed Pad.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The lighting driver has a total of 6 outputs that are available for use.The LED driving board operates with a supply voltage of 4.5V~5.5V.A maximum voltage of N-Channel volts is available from the output of this LED driver.This object belongs to the MC33882 family.There are 30 terminations in it.It contains 1 functions.It is possible to obtain high efficiency with a supply voltage of 5V.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.A maximum supply voltage of 5.5V is set in Vsup.Normal operation requires a voltage above 4.5V for the supply voltage.This part has a power supply of 59/17V volts.
MC33882PVWR2 Features
Supplied from 5V
MC33882PVWR2 Applications
There are a lot of NXP USA Inc. MC33882PVWR2 Power Switches ICs applications.
- Solid-State Drives
- Hot Swap
- Portable Music Players
- Smartphone and PDA
- USB Ports/Hubs
- Set-top-box
- Various applications equipped with buttons
- USB Power Distribution
- Storage (HDDs, SSDs)
- HDD and SSD
