MC33996EK
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-BSSOP (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Feature | PWM Input |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC33996 |
| JESD-30 Code | R-PDSO-G32 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 27V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | SPI |
| Current - Output (Max) | 900mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 1.5V~3V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:16 |
| Voltage - Load | 5V~27V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 550m Ω |
| Turn Off Time | 10 µs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 11mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MC33996EK Overview
As a result, it is packaged in the form of a Tube.In the 32-BSSOP (0.295, 7.50mm Width) Exposed Pad package, it is included.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.There are 16 outputs available on this lighting driver.The LED driving board operates at 1.5V~3V volts.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has PWM Input.It belongs to the MC33996 family.A total of 32 terminations have been recorded.It consists of 1 functions.The lighting driver's maximum output is 900mAV.Supply voltages of 13V allow for high efficiency.The maximum supply voltage is set to 27V.For normal operation, the supply voltage (Vsup) must be kept above 5V.
MC33996EK Features
Supplied from 13V
MC33996EK Applications
There are a lot of NXP USA Inc. MC33996EK Power Switches ICs applications.
- Solid State Drivers
- Portable/Handheld Devices
- Hot Swap
- USB Ports/Hubs
- Wireless/Networking Cards
- Handheld Devices
- Solid-State Drives
- Storage Drives
- Hot Swaps
- PDAs
