MC33996EKR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-BSSOP (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Feature | PWM Input |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC33996 |
| JESD-30 Code | R-PDSO-G32 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 27V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | SPI |
| Current - Output (Max) | 900mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 1.5V~3V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:16 |
| Voltage - Load | 5V~27V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 550m Ω |
| Turn Off Time | 10 µs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 11mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MC33996EKR2 Overview
It is packaged in the manner of a Tape & Reel (TR).It is included in the package 32-BSSOP (0.295, 7.50mm Width) Exposed Pad.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.To operate, it needs a supply voltage of 1.5V~3V.It has a maximum output voltage of N-Channel volts.The lighting driver has PWM Input features.As you can see, it comes from the MC33996 family.A total of 32 terminations have been found in it.There are 1 functions of the LED driver.From the lighting driver, there is a maximum output of 900mAV.High efficiency is possible at 13V supply voltage.The maximum supply voltage for this lighting driver is set to 27V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 5V.
MC33996EKR2 Features
Supplied from 13V
MC33996EKR2 Applications
There are a lot of NXP USA Inc. MC33996EKR2 Power Switches ICs applications.
- Solid State Drivers
- USB Protection
- Smart Phones, Feature Phones
- Wireless/Networking Cards
- Solid-State Drives
- Mobile Communication Devices
- Portable Devices
- Smartphone and PDA
- Low Voltage I/O System Power
- Storage Drives
