MC3403DR2
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC3403 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-18/3/36V |
| Operating Supply Current | 2.8mA |
| Nominal Supply Current | 2.8mA |
| Output Current | 20mA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 10mV |
| Rise Time | 350ns |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.8μA |
| Power Supply Rejection Ratio (PSRR) | 38.24dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Nominal Gain Bandwidth Product | 1MHz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC3403DR2 Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Cut Tape (CT) case. In recent months, the number of terminations has approached 14. A total of 14 pins are attached to buffer op amp. Please take in mind that op amp should be run at 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 14 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 10mV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. Using a supply current of 2.8mA , this buffer op amp will be able to operate. 106.02dB should be the voltage gain. The buffer op amp is rated for an operating voltage of 4 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 18V voltage. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.
MC3403DR2 Features
14 Pins
supply voltage of 15V
106.02dB voltage gain
MC3403DR2 Applications
There are a lot of ON Semiconductor MC3403DR2 Instrumentational OP Amps applications.
- Industrial applications including automation
- Weak signal detection
- Wireless base stations
- Automotive sensors
- Cinema or auditorium audio system
- Communication device
- E-book readers
- Band-stop filter
- Multimedia playback equipment
- Video amplifiers
