banner_page

MC3403N

4 Channels 30mA per Channel 200nA 70 dB Instrumentational OP Amps 0.8μA 15V 5V~30V ±2.5V~15V MC3403 14 Pins 14-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-MC3403N
  • Package: 14-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 717
  • Description: 4 Channels 30mA per Channel 200nA 70 dB Instrumentational OP Amps 0.8μA 15V 5V~30V ±2.5V~15V MC3403 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Through Hole
Package / Case 14-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 14
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Number of Functions 4
Supply Voltage 15V
Base Part Number MC3403
Pin Count 14
Operating Supply Voltage 15V
Power Supplies +-2.5/+-15/5/30V
Number of Channels 4
Operating Supply Current 2.8mA
Nominal Supply Current 7mA
Output Current 30mA
Slew Rate 0.6V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 70 dB
Current - Input Bias 200nA
Voltage - Supply, Single/Dual (±) 5V~30V ±2.5V~15V
Output Current per Channel 30mA
Input Offset Voltage (Vos) 10mV
Bandwidth 1MHz
Rise Time 350ns
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 1000 kHz
Voltage Gain 106.02dB
Average Bias Current-Max (IIB) 0.8μA
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 18V
Voltage - Input Offset 2mV
Low-Bias NO
Micropower NO
Bias Current-Max (IIB) @25C 0.5μA
Programmable Power NO
Nominal Gain Bandwidth Product 1MHz
Max I/O Voltage 10mV
Power NO
Input Offset Current-Max (IIO) 0.05μA
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MC3403N Overview


In order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tube case. A total of 14 terminations have been reported in the past few weeks. There are a total of 14 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are located on the operational amplifiers. The input offset voltage is 10mV. This electronic part is recommended for mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. A supply current of 2.8mA can be used to operate this linear amplifier. The voltage gain should stay at 106.02dB. The op amp ic has 4 channels on it. The operating supply voltage of instrumentation amplifier is rated 15V voltage.

MC3403N Features


14 Pins
supply voltage of 15V
106.02dB voltage gain

MC3403N Applications


There are a lot of Texas Instruments MC3403N Instrumentational OP Amps applications.

  • Automation control systems
  • Weak signal detection
  • Exponential operation circuits
  • Portable media players
  • High-frequency data acquisition systems
  • Video data acquisition
  • Fast A/D and D/A converters
  • Thermocouples
  • Power control
  • Television

Write a review

Note: HTML is not translated!
    Bad           Good