MC34060AD
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC34060A |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Control Features | Dead Time Control |
| Input Voltage (Min) | 7V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 25kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 200kHz |
| Max Duty Cycle | 96 % |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC34060AD Overview
With its 14-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tube solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. 7V~40V is the supply voltage and the operating voltage of the dc control. Qualified to work in a 0°C~70°C TA dc switcher. It can switch at 25kHz. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Dead Time Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . Various 14 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. MC34060A can be searched for other relevant dc to dc converter ics. In total, switching converter has 14 pins. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended to use 7V as the minimum input voltage of dc dc voltage regulator. Test statistics indicate DC regulator outputs 30V voltage. At most, the dc to dc regulator accepts 40V input voltage. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 96 % during power-up and power-down. There is a maximum frequency of 200kHz for this dc regulators. To operate the voltage regulator dc to dc safely and reliably, users should apply 15V.
MC34060AD Features
Transistor Driver Outputs
Switching Frequency: 25kHz
Dead Time Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
MC34060AD Applications
There are a lot of ON Semiconductor MC34060AD DC to DC converter applications.
- Cutting machine tools
- Ball screw pair
- Printing equipment
- Lathes
- Packaging
- Industrial robots
- Planers
- Domestic water pumps
- Program control systems
- Geothermal power
