MC34060AP
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Terminal Pitch | 2.54mm |
| Frequency | 200kHz |
| Base Part Number | MC34060A |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Control Features | Dead Time Control |
| Input Voltage (Min) | 7V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 25kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 96 % |
| Height Seated (Max) | 4.69mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC34060AP Overview
As a result of 14-DIP (0.300, 7.62mm) compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 7V~40V. Suitable for work in a 0°C~70°C TA dc switcher. Switching can be done at 25kHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. Dead Time Control provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 14. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "MC34060A". 14 pins are present on switching converter. Switching converter type is specifically Switching Regulator or Controllers. 7V should be the minimum input voltage for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 30V voltage. This dc to dc regulator accepts only 40V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. A duty cycle set at 96 % ensures voltage regulator dc to dc reliability during power-on and power-off. There is 200kHz frequency setting on the switching controller. To operate the voltage regulator dc to dc safely and reliably, users should apply 15V.
MC34060AP Features
Transistor Driver Outputs
Switching Frequency: 25kHz
Dead Time Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 200kHz
MC34060AP Applications
There are a lot of ON Semiconductor MC34060AP DC to DC converter applications.
- Television equipment
- Overvoltage protection circuits in TV sets
- Mobile phones
- Boring machines
- Smoke prevention equipment
- Smart grid
- Experimental setup
- Computer application technology
- Servo drive system
- PSRR circuits
