MC34064P-5G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 12 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 625mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC34064 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 390μA |
| Power Dissipation | 625mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.6V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.6V |
| Undervoltage Threshold | 4.61V |
| Overvoltage Threshold | 4.7V |
| Height | 5.334mm |
| Length | 5.1816mm |
| Width | 4.191mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC34064P-5G Overview
Power management is mounted through 3 terminals. Power management is packaged in a Bulk way. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a TO-226-3, TO-92-3 (TO-226AA) package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. Manage ics operate at 4V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. By Through Hole, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 3 pins on the board. This power management has 3 pins. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 6.5V volts. The recommended mounting type is Through Hole. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 390μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MC34064, the base power ics number.
MC34064P-5G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
390μA operating supply current
MC34064P-5G Applications
There are a lot of ON Semiconductor MC34064P-5G Voltage Supervisors applications.
- Microcontroller system
- Electrical fire monitoring system
- DSP
- Leakage protection
- Power distribution systems of operating room
- Kitchen appliances
- Computer applications
- Personal computers
- Multi-voltage system
- Radio
