banner_page

MC34067PG

16 Terminals 8.6V~20V 16-Pin MC34067 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 2.05MHz Transistor Driver


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC34067PG
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 811
  • Description: 16 Terminals 8.6V~20V 16-Pin MC34067 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 2.05MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE, NOT REC (Last Updated: 1 day ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Weight 4.535924g
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2007
JESD-609 Code e3
Pbfree Code yes
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Tin (Sn)
Subcategory Switching Regulator or Controllers
Technology BIPOLAR
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Frequency 525kHz
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MC34067
Function Step-Up/Step-Down
Number of Outputs 2
Output Voltage 5.1V
Output Type Transistor Driver
Input Voltage-Nom 12V
Analog IC - Other Type SWITCHING CONTROLLER
Output Configuration Positive, Isolation Capable
Power Dissipation 1.25W
Output Current 10mA
Voltage - Supply (Vcc/Vdd) 8.6V~20V
Max Supply Current 800μA
Control Features Enable, Soft Start
Topology Flyback
Control Mode VOLTAGE-MODE
Frequency - Switching 2.05MHz
Halogen Free Halogen Free
Control Technique RESONANT CONTROL
Rise Time 50ns
Synchronous Rectifier No
Fall Time (Typ) 50 ns
Switcher Configuration PUSH-PULL
Max Duty Cycle 25 %
Output Phases 1
Height 3.43mm
Length 19.55mm
Width 6.85mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MC34067PG Overview


Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. 2 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. There are Transistor Driver dc switching's output (s) that it can handle. 8.6V~20V is the operating voltage and supply voltage of the dc control. Qualified to work in an dc switcher with 0°C~70°C TA. It can switch at 2.05MHz. The Through Hole makes it ideal for general dc dc regulator. To provide efficient switching control, Enable, Soft Start is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of 16 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including RESONANT CONTROL. The nominal DC switcher's voltage input is 12V. Searching "MC34067" will return other relevant dc to dc converter ics. There are 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. According to the test statistics, DC regulator outputs 5.1V voltage. If you start a project, note down the dc dc regulator's usual output current of 10mA. The maximum duty cycle of this voltage regulator dc to dc is set to 25 % to ensure reliability during power-up and power-down. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. Switching controllers operate at 525kHz frequencies. Components may become damaged if their current exceeds 800μA.

MC34067PG Features


Transistor Driver Outputs
Switching Frequency: 2.05MHz
Enable, Soft Start
RESONANT CONTROL
Max Duty Cycle: 25 %
Frequency: 525kHz

MC34067PG Applications


There are a lot of ON Semiconductor MC34067PG DC to DC converter applications.

  • Household control circuits
  • Magnetohydrodynamic power
  • SMT equipment
  • Scientific research
  • Computed tomography (CT)
  • Emergency lighting monitoring equipment
  • Access control systems
  • Nuclear power plants
  • Lathes
  • ATMs

Write a review

Note: HTML is not translated!
    Bad           Good