MC34072AMTTBG
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFQFN |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MC34072A |
| Pin Count | 10 |
| Operating Supply Voltage | 22V |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 3.8mA |
| Output Current | 30mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 4.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Nominal Gain Bandwidth Product | 4.5MHz |
| Height | 750μm |
| Length | 2.6mm |
| Width | 2.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MC34072AMTTBG Overview
Packaged in a 10-WFQFN case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 10 terminations. The total number of pins on linear amplifier is 10. Please take in mind that op amp should be run at 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 10 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 500μV. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. As long as the supply current of the chip does not exceed 1.9mA, this op amp ic can operate. Voltage gain should remain at 100dB. This linear amplifier has a total of 2 elements. The operating supply voltage of the buffer op amp is rated at 22V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.
MC34072AMTTBG Features
10 Pins
supply voltage of 15V
100dB voltage gain
MC34072AMTTBG Applications
There are a lot of ON Semiconductor MC34072AMTTBG Instrumentational OP Amps applications.
- ECG equipment
- Home audio systems
- Measurements of Wheatstone bridge
- Tablets
- Semiconductor detectors
- Band-stop filter
- Strain gauges
- Automatic control
- Medical imaging
- Hand-held batteries
