MC34072DG
| Parameters | |
|---|---|
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC34072 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 3.8mA |
| Output Current | 30mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 4.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 4.5MHz |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
MC34072DG Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. In the case of Tube cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. There are a total of 8 pins on this op amp. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 5mV voltage. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. As long as the supply current of the chip does not exceed 1.9mA, this op amp ic can operate. There should be no change in the voltage gain. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 22V voltage. For the packing of the instrumentation amplifier, RAIL is adopted.
MC34072DG Features
8 Pins
supply voltage of 15V
100dB voltage gain
MC34072DG Applications
There are a lot of ON Semiconductor MC34072DG Instrumentational OP Amps applications.
- High input resistance broadband
- Gaming industry
- ECG equipment
- Hand-held batteries
- Signal filtering
- Multiplication circuits
- High gain DC amplifier
- Medical imaging
- Micro signal measurement
- Power generator
