MC34072PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 19 hours ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC34072 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 22V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 3.8mA |
| Output Current | 30mA |
| Max Supply Current | 4mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 4.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 4.5MHz |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC34072PG Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 8 pins that make up the linear amplifier. There is an input offset voltage of 5mV for this buffer op amp. This electronic part is recommended for mounting type Through Hole. With regard to operating temperature, op amp ranges 0°C~70°C. Operational amplifier can operate supply current at 1.9mA. It is a member of the 100dB's 100dB family. Instrumentation amplifier has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 22V. To pack the operational amplifier ics, RAIL is adopted as the packing method.
MC34072PG Features
8 Pins
supply voltage of 15V
100dB voltage gain
MC34072PG Applications
There are a lot of ON Semiconductor MC34072PG Instrumentational OP Amps applications.
- Switching amplifier
- High-frequency data acquisition systems
- Biopotential
- Inverse/same-phase proportional circuit
- Thermocouples
- Semiconductor detectors
- Fast A/D and D/A converters
- Vehicle electronics
- Video data acquisition
- Commercial audio systems
