MC34072VPG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC34072 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 3.8mA |
| Output Current | 30mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 5mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Nominal Gain Bandwidth Product | 4.5MHz |
| Height Seated (Max) | 4.45mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC34072VPG Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. This is a General Purpose type op amp. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 15V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 5mV. This electrical part should be mounted using type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. A supply current of 1.9mA can be used to operate this linear amplifier. The voltage gain should stay at 100dB. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 22V. As a result of this, the buffer amplifier is packed in RAIL.
MC34072VPG Features
8 Pins
supply voltage of 15V
100dB voltage gain
MC34072VPG Applications
There are a lot of ON Semiconductor MC34072VPG Instrumentational OP Amps applications.
- Exponential operation circuits
- Proportional operation circuits
- Industrial applications including automation
- Signal amplification
- Oscilloscopes
- Power control
- Industrial control system
- Television broadcasting equipment
- Semiconductor detectors
- Instrumentation
