MC34074VDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC34074 |
| Pin Count | 14 |
| Operating Supply Voltage | 22V |
| Number of Elements | 4 |
| Power Supplies | +-15V |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 7.6mA |
| Output Current | 30mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 4.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Max Frequency | 1kHz |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Nominal Gain Bandwidth Product | 4.5MHz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC34074VDR2G Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. The pins on this board total to 14 in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 14 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. Using a supply current of 1.9mA , this buffer op amp will be able to operate. 100dB should remain the voltage gain. A total of 4 elements are present in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 22V voltage. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
MC34074VDR2G Features
14 Pins
supply voltage of 15V
100dB voltage gain
MC34074VDR2G Applications
There are a lot of ON Semiconductor MC34074VDR2G Instrumentational OP Amps applications.
- High gain DC amplifier
- Radiation thermometry transducers
- Industrial control system
- Signal amplification
- Oscilloscopes
- Automatic control
- Digital cameras
- Semiconductor detectors
- Band-pass filter
- Micro signal measurement
