MC34151DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 560mW |
| Technology | BIPOLAR |
| Voltage - Supply | 6.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC34151 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Nominal Supply Current | 10.5mA |
| Input Type | Inverting |
| Rise Time | 31ns |
| Fall Time (Typ) | 32 ns |
| Rise / Fall Time (Typ) | 31ns 32ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.6V |
| Turn Off Time | 0.1 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC34151DR2 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tape & Reel (TR).There are 2 drivers installed for this device.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 6.5V~18V.The gate type on this device is N-Channel MOSFET.This device allows temperatures in the range of 0°C~150°C TJ.This program uses the input type of Inverting.Its configuration starts with 8 terminations.The base part number MC34151 refers to a number of related parts.The device is mounted using Surface Mount.When designing, the device is configured with 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.There are 8 component pins on the board.Using 560mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.
MC34151DR2 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 560mW
MC34151DR2 Applications
There are a lot of ON Semiconductor MC34151DR2 gate drivers applications.
- serial peripheral interface (SPI), I2C
- General Purpose 3-Phase Inverter
- Portable Media Players
- Motor Controls
- Motor Drives
- Head-up and Head mounted displays
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Smart Phones
- Solar inverters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
