Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
0°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
560mW |
Technology |
BIPOLAR |
Voltage - Supply |
6.5V~18V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
12V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC34151 |
Pin Count |
8 |
Max Output Current |
1.5A |
Operating Supply Voltage |
12V |
Nominal Supply Current |
10.5mA |
Power Dissipation |
560mW |
Propagation Delay |
100 ns |
Input Type |
Inverting |
Turn On Delay Time |
100 ps |
Halogen Free |
Halogen Free |
Rise Time |
31ns |
Fall Time (Typ) |
32 ns |
Turn-Off Delay Time |
100 ns |
Rise / Fall Time (Typ) |
31ns 32ns |
Interface IC Type |
BUFFER OR INVERTER BASED MOSFET DRIVER |
Channel Type |
Independent |
Number of Drivers |
2 |
Turn On Time |
0.1 μs |
Output Peak Current Limit-Nom |
1.5A |
Driven Configuration |
Low-Side |
Gate Type |
N-Channel MOSFET |
Current - Peak Output (Source, Sink) |
1.5A 1.5A |
High Side Driver |
NO |
Logic Voltage - VIL, VIH |
0.8V 2.6V |
Turn Off Time |
0.1 μs |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC34151DR2G Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the packaging method.Configuration is supported by 2 drivers.The device is mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 6.5V~18V.N-Channel MOSFET is the gate type used for this design.There is a temperature range for this device of 0°C~150°C TJ.This program uses the input type of Inverting.It's configured with 8 terminations.There are various parts that can be found under its base part number MC34151.Devices are mounted by Surface Mount.When designing, the device is configured with 8 pins.Specification is for 12V supply voltage operation.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 1.5A.Its subcategory of MOSFET Drivers contains various useful electronic components.There are 8 component pins on the board.The maximum power dissipation of 560mW shows its maximum capability to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V volts.
MC34151DR2G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 560mW
MC34151DR2G Applications
There are a lot of ON Semiconductor MC34151DR2G gate drivers applications.
- High current laser/LED systems
- PCMCIA applications
- Isolated switch mode power supplies (SMPS)
- Broadcast equipment
- Solar power supplies
- Topologies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor controllers
- Telecom switch mode power supplies
- Welding