MC34161DMR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Tin (Sn) |
| Additional Feature | MINIMUM SUPPLY NEEDED FOR NEGATIVE SENSING IS 4V |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC34161 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 560μA |
| Max Supply Current | 900μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 2 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 1.245V |
| Max Reset Threshold Voltage | 1.295V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC34161DMR2G Overview
A total of 8 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. Power management consists of 2 channels, each of which can be used independently. Please find attached 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 2-voltage supply. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 8. This power management has 8 pins. A voltage (Vsup) that doesn't fall below 2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 40V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supervisor's supply current is specified to 560μA. There are also other features in the software such as [0], just to mention a few. To find similar IC managements from the manufacturer, you can always search by MC34161. A power supply of 5V watts is required for the operation of this power management. The maximum supply temperature voltage supervisor can handle is 900μA.
MC34161DMR2G Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
560μA operating supply current
MC34161DMR2G Applications
There are a lot of ON Semiconductor MC34161DMR2G Voltage Supervisors applications.
- Linux and server computing
- Radar
- Digitally controlled LDO regulators circuit
- Electrical fire monitoring system
- Consumer electronics
- Power distribution systems of infant care room
- Battery-powered equipment
- DC stabilized power supply module
- Efficient information transmission
- Network equipment
