MC34164D-5R2
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC34164 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 32μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.04mA |
| Threshold Voltage | +4.33V |
| Undervoltage Threshold | 4.33V |
| Overvoltage Threshold | 4.45V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC34164D-5R2 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 240. In a 2.4V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. During operation, this power management system outputs Open Drain or Open Collector. There is a 32μA supply current present in the power management. You can always use MC34164, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 5V volts to function properly.
MC34164D-5R2 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
32μA operating supply current
MC34164D-5R2 Applications
There are a lot of ON Semiconductor MC34164D-5R2 Voltage Supervisors applications.
- Important electronics for automotive protection
- Military electronics
- Household appliances
- Battery cars
- Medical-specific insulation monitor
- Refrigeration
- Data storage applications
- Satellite navigation
- Consumer electronics
- emergency room
