MC34164DM-5R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 520mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC34164 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 32μA |
| Power Dissipation | 520mW |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 4.15V |
| Max Reset Threshold Voltage | 4.45V |
| Threshold Voltage | +4.33V |
| Undervoltage Threshold | 4.33V |
| Overvoltage Threshold | 4.45V |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC34164DM-5R2G Overview
There are 8 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. The purpose of this IC power is to provide you with a reference of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 2.4V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 8 pins. Pin count of the power management is 8. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during 0°C~70°C TA . As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supply current of the power management is 32μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MC34164, which is the base power ics number. To operate this power management, you will need at least 5V volts of power.
MC34164DM-5R2G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
32μA operating supply current
MC34164DM-5R2G Applications
There are a lot of ON Semiconductor MC34164DM-5R2G Voltage Supervisors applications.
- Efficient information transmission
- Transformer load monitoring equipment
- Automotive permanent magnet synchronous motors
- Medical-specific isolation transformer
- Radar
- Power distribution systems of ICU
- Leakage current detection
- Multi-voltage system
- Digitally controlled LDO regulators circuit
- Magnetic resonance imaging
