MC34164P-3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Bulk |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Current Rating | 12mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC34164 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Output Voltage | 12V |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 24μA |
| Power Dissipation | 700mW |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.04mA |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.8V |
| Threshold Voltage | +2.7V |
| Undervoltage Threshold | 2.71V |
| Overvoltage Threshold | 2.8V |
| Height | 6.35mm |
| Length | 8.89mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC34164P-3G Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. A Bulk package is used to package the power management. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes TO-226-3, TO-92-3 (TO-226AA) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. There is a specification for the peak reflow temperature of the package to be 260. When 2.4V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Through Hole. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 3 pins on the board. This power management system has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. A Through Hole mounting type is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. During operation, this power management system outputs Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 24μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to MC34164, which is the base power ics number. It requires 3V watts of power to operate this voltage supervisor. Voltage supervisor ic is rated for 12mA currents.
MC34164P-3G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
24μA operating supply current
Current rating of 12mA
MC34164P-3G Applications
There are a lot of ON Semiconductor MC34164P-3G Voltage Supervisors applications.
- Military electronics
- Data storage applications
- Dash board
- Efficient information transmission
- Rechargeable batteries
- Radar
- Urban rail transit weak current power monitoring
- Solar power charger
- Household appliances
- Medical-specific insulation monitor
