MC3479P
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | CMOS |
| Voltage - Supply | 7.2V~16.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC3479 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 7.2V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 75mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 350mA |
| Logic Function | AND |
| Voltage - Load | 7.2V~16.5V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 4.69mm |
| Length | 19.4mm |
| Width | 7.62mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC3479P Overview
Drivers controllers is designed with Tube package.Drivers controllers comes in a 16-DIP (0.300, 7.62mm) case.Through Holeshould be used for mounting the part.The component connected in General Purposeis compatible with it.The device can supply 7.2V~16.5V volts.In terms of operating temperature, it falls within the range 0°C~70°C TA.There are 16 terminations available in the part.Drivers controllers is possible to apply voltage to the load at the rate of 7.2V~16.5V.Drivers controllers is important to remember that this amplifier should be run at 12V.Through Holeis the recommended mounting method.Drivers controllers is recommended to keep the part output current at 350mA.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.Drivers controllers is based on the MC3479 part number.16pins are available on the device.In the Motion Control Electronicsseries, it is included.
MC3479P Features
Applications : General Purpose
Load voltage across the chip 7.2V~16.5V
base on MC3479 number
MC3479P Applications
There are a lot of ON Semiconductor MC3479P motor drivers applications.
- Footwell lighting
- Mobile phone display backlight and key light driving
- Brake lights
- Commercial office
- Indicator circuit
- Daytime running lights (DRLs)
- Lighting for the ambience of tunability
- High power LED street light
- Horticultural applications
- LED bias
