MC35XS3500PNA
| Parameters | |
|---|---|
| Package / Case | QFN |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 937.688827mg |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.9mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Temperature Grade | AUTOMOTIVE |
| Interface | SPI |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | -300mV |
| Nominal Supply Current | 20mA |
| Output Configuration | High Side |
| Rise Time | 50ns |
| Fall Time (Typ) | 50 ns |
| Fault Protection | Over Temperature, Over Voltage |
| Turn On Time | 120 µs |
| Supply Voltage1-Nom | 12V |
| Turn Off Time | 120 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.2mm |
| Length | 12mm |
| Width | 12mm |
| RoHS Status | RoHS Compliant |
MC35XS3500PNA Overview
This is included in the QFN package.There are a total of 24 terminations on it.In this case, the device is located at terminal QUAD.In total, it has 24 pins.A supply voltage of 5V can result in high efficiency.Operating the device requires 24 pins.Hot-swappable device is stable to operate at a temperature of 150°C°C at the maximum.For reliability, it must work at a minimum temperature of -40°C degrees Celsius.As a default, it's set to output 6.An input voltage of 5.5VV is the maximum it can handle.Hot Swap can work wHot Swaph as low a supply voltage as feasible, such as -300mVV.
MC35XS3500PNA Features
The terminal position of 24
MC35XS3500PNA Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MC35XS3500PNA hot swap controllers applications.
- Switch
- Disconnect faulty loads before supply voltage drops
- Loads
- Base station power distribution system
- Reverse current protection
- Networking
- Remote access server
- Temperature monitor output
- DC boost circuit
- Datacom
