MC44608P100
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Base Part Number | MC44608 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 6.6V~16V |
| Input Voltage (Min) | 6.6V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Duty Cycle | 82% |
| Output Isolation | Isolated |
| Voltage - Start Up | 13.1V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC44608P100 Overview
It is embedded in package 8-DIP (0.300, 7.62mm) .There is a AC/DC power converter of Tube available.It is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -25°C~150°C TJ degrees Celsius.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.The voltage range of the supply can be set to 6.6V~16V (Vcc/Vdd).There are a total of 8 terminations in it.The pins of the ac-dc converter count up to 8 .The MC44608 family can be used to search for similar acdc converters.There are 1 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .High efficiency can be achieved when AC to DC converters frequency is set to 100kHz .
MC44608P100 Features
Packaged with 8-DIP (0.300, 7.62mm)
MC44608P100 Applications
There are a lot of ON Semiconductor MC44608P100 AC DC Converters applications.
- Vacuum Cleaner
- Industrial controls
- IoT Applications
- Automotive Infotainment
- Consumer electronics
- LED Driver
- Power adapters for monitors
- Auxiliary Power Supplies
- Replacements for bulky plug-in transformers
- Off--line Battery Charger
