MC4558CDT
| Parameters | |
|---|---|
| Number of Channels | 2 |
| Operating Supply Current | 2.3mA |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 680mW |
| Output Current | 20mA |
| Slew Rate | 2.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | ±2V~20V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 5.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Bias Current-Max (IIB) @25C | 0.4μA |
| Dual Supply Voltage | 9V |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC4558 |
| Pin Count | 8 |
| Power Supplies | +-15V |
MC4558CDT Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 5mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 2.3mA can be used to operate this linear amplifier. The voltage gain should stay at 106.02dB. The op amp ic has 2 channels on it. It is used TAPE AND REEL to pack the op amps.
MC4558CDT Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
MC4558CDT Applications
There are a lot of STMicroelectronics MC4558CDT Instrumentational OP Amps applications.
- Multimedia playback equipment
- MP3
- Precision measurement
- High-frequency data acquisition systems
- Proportional operation circuits
- Television broadcasting equipment
- Information processing
- Fast A/D and D/A converters
- Polarized electrodes
- Laptop
